给兆庄发信息 客服服务①
  给兆庄发信息 客服服务②
  给兆庄发信息 客服服务③
   
    
go back
Product Name: F-188 electronic winding machine
Products:
  

F-188 electronic winding machine
  Machine is applicable to the telecommunications, electrical system for a variety of industries around the inductance coil, instrument coils, relays, timers, radio and television in a variety of coils, power transformers and so on. The aircraft is a national initiative, the main components imported components, layout and design beautiful, convenient and flexible operation, stable performance, high efficiency, counting accuracy, show clear, hand-back auto-reversible counting, low noise and no gear and so on.
Transmission:

1, the machine excited by a string-type micro-motor drive (also can be customized according to user requirements capacitor motor drive, its motor, low noise, good performance, long life and other characteristics, but differences should bear the motors, using methods unchanged). Spindle rotation automatic counting shows that each winding automatic lap count display (can also be customized according to user 1 / 10 laps showed that the FD-188 type).
2, spindle 2 is equipped with two high-precision high-speed ball bearings.
Usage:
1, the machine should be installed in a relatively sturdy table, such as the thickness of the table for the wood need to 2 cm above floor on the winding machine has 4 fixed holes, for the winding machine and the table between the tight solid installation, due to the high speed of this machine can not have vibration phenomenon, or else by the long-term use may cause component solder joints loose, line translucent or damage to electronic components, there does not appear fault phenomena and so on.
2, respectively, the governor two plugs into electrical sockets and power outlet, speed controller can be mounted in the operator's foot pedal controlled by the governor to operate.
3, in order to winding machine sleeve variable, so using spindle sleeve by winding package installation, the fastening of the winding machines after the trial run is to switch to a balanced concentric winding shaft, such as the imbalance in the different heart, should be given to adjust the .
4, use should be preceded by opening the power switch, then press RESET button, see the show as [00000] foot governor may work when you run, the number of turns required to be winding machine around to the governor when the slow relaxation and then gently brake with his right hand, such as downtime found that too many turns can be used to manually counting backwards will automatically slow down.

Technical parameters:
   Power supply voltage: 220V 150W count range of 0-turns 9999.9
     Be around the diameter :0.03 --- 0 .48 mm Spindle Speed :500-4500 r / min (using the pedal speed)
Could be around the coil diameter: 65mm could be around the coil length: 70mm
     Power failure to protect data: "36 hours

Note:
1, with contacts within the governor, is strictly prohibited stays playing and percussion governor.
2, winding machine, or unplug the power plug is strictly prohibited after the governor of the plug.
3, the electrical use advanced copper-based oil-bearing, generally without refueling. Such as the use of frequent refueling once every three months, from the motor at both ends of the window at the drop in wool felt, each 2 to 3 drops of oil lubrication, not too much. Regularly check the motor brushes, when the remaining length of the brush wear is less than 5mm should be transposed.
4, winding machine power supply must have a good grounding device, work should be turned off and switch or unplug the power plug.
5, such as the governor failure, can be forced open the governor of the buckle head, adjusting the pressure switch cover sheet before and after the position of governor until the shit in turn depressed when all the contact spring.


All rights reserved 2009-2010 WEN ZHOU ZHAOZHUANG AUTOMATION EQUIPMENT CO.,LTD.registration No.:浙ICP备05035972号 | 浙ICP备06015570号
Web Support:qianren Management mail
ADD:No.45 front lane under mountain daybreak east road Wenzhou Zhejiang TELL:86-577-88935088 88936088 88937088
FAX:86-577-88957766 | E-mail:zhaozhuangauto@163.com