给兆庄发信息 客服服务①
  给兆庄发信息 客服服务②
  给兆庄发信息 客服服务③
   
    
go back
Product Name: F-130-type hand-e-counting winding machine
Products:
  
F-130-type hand-e-counting winding machine
The winding machine is hand-drive, two speed gear, electronic counting showed that counting accuracy, flexible operation, stable performance, clear display and can automatically determine the direction of the data with a power-off protection.

Technical parameters:
  
Transmission:
This machine is hand-to-use, two speed. Hand gear can be installed with the winding shaft handle. Hand gear is 57 teeth, the bridge take the initiative to round of 19 teeth, driven wheel 38 tooth, winding gear of 19 teeth. Shake the handle when installed in hand-gear transmission speed ratio of 1:6, when installed in the winding shaft transmission speed ratio is 1:1.
Usage:
1, the machine should be installed in a relatively sturdy table, winding machine floor there are four fixed holes, for the winding machine and table installed between the fastening.
2, the local access to 220V electricity, turn the power switch, then press RESET button, see the show can work to zero.
Notes
1, please strictly control the supply voltage 220V ± 10%.
2, this machine is equipped with a photoelectric sensor within the spindle, is strictly prohibited beat spindle at both ends, and requested to strictly control the spindle axis string action, or they will cause damage to photoelectric sensor error count or not count.
3, if the error, check to see whether the skid frame bobbin, photoelectric sensor and dial out whether there is, within the four photoelectric sensors whether the friction eyes out. Please adjust and remove the dust photoelectric sensors.
4, the electrical and mechanical way of electronic circuits, when you work away from the welding machine, electromagnet, radio transmission equipment such as strong electromagnetic interference, so as not to affect the normal count.
5, this machine is hand-winding machine, and strictly forbid the motor drag.
Instructions
F-130 count range 0-9999.9 circle, counting error of "0.1 circle (1 / 10 count function).


All rights reserved 2009-2010 WEN ZHOU ZHAOZHUANG AUTOMATION EQUIPMENT CO.,LTD.registration No.:浙ICP备05035972号 | 浙ICP备06015570号
Web Support:qianren Management mail
ADD:No.45 front lane under mountain daybreak east road Wenzhou Zhejiang TELL:86-577-88935088 88936088 88937088
FAX:86-577-88957766 | E-mail:zhaozhuangauto@163.com